Get Started

Tobii Pro Nano is a small and portable eye tracker that can be used to conduct studies on laptops, PC monitors up to 19ʺ (16:9), mobile devices by using the mobile device stand, real-world interfaces, projections, simulators, and TV screens.

Install and configure your Tobii Pro Nano

Tobii Pro Nano setup

Start by checking the following

Does the computer meet the eye tracker requirements?

  • Windows 10 (Professional or Enterprise editions)
  • Connector USB 2.0 Type A port
  • Administrator rights to install software and manage your firewall

Does the computer meet the requirements of the eye tracking software?

  • Tobii Pro Lab system requirements
  • Tobii Pro SDK

Does the display used for eye tracking meet the eye tracker requirements?

  • Maximum screen size: 19” (16:9)

Step 1: Install Pro Nano on your computer

  1. Install or update to Tobii Pro Eye Tracker Manager version 1.11 or newer. After the installation, the application will open automatically.
  2. Connect the eye tracker to the computer´s USB 2.0 Type A port.
  3. In Pro Eye Tracker Manager click on the “Install or update Eye Trackers” card.
  4. Find the Pro Nano eye tracker in the list and click on “Install drivers”, then follow the instructions of the installation wizard.
  5. When your installation is finished, restart Pro Eye Tracker Manager. To close Pro Eye Tracker Manager, first locate the Eye Tracker Manager icon on the notification area of your Windows taskbar, then right-click on the icon and select “Exit”. Launch the application again.
  6. The Pro Nano eye tracker card is displayed in Eye Tracker Manager.
  7. Disconnect the USB cable and move to the next step


          Click here for more detailed instructions

Step 2: Mount Pro Nano on the screen

Mounting instructions
  1. Find the center of the screen and clean the bezel.
  2. Peel off the adhesive tape and mount the bracket on the bezel. Press the bracket against the bezel for 30 seconds and let it rest for 1 hour before attaching the eye tracker.
  3. Attach the eye tracker and make sure that the mounting bracket fits exactly in the slot on the back of the eye tracker. A magnet will hold it in place. 
  4. Re-connect the eye tracker USB cable to the computer and move on to the next step.  


          Click here for more detailed instructions

Step 3: Configure your Pro Nano

  1. In the Tobii Pro Eye Tracker Manager, click on the Pro Nano card.
  2. Locate the 'Display setup' on the 'Eye Tracker Settings' panel.
  3. Click 'Create new' and follow the instructions in each configuration step.
  4. Use the 'User positioning guide' to check if the eye tracker can detect your eyes.
  5. Test your setup and start exploring your eye tracking solution.


         Click here for more detailed instructions


After installing and configuring your Tobii Pro Nano, start exploring it together with your eye tracking software.